Contact us

TEL: 86-13531346250

Fax: 86-757-28878366

Contact person: Damon

Address: Rongli Industrial Park,Ronggui Shunde,FoShan,China

Your present position: Home > News > Company news

Working principle of fish tank

Release date: 2015/11/30   Access times: 465

Because of the water body between the inside and outside the glass plate, there will be a gap between the great pressure and gravity of the water body will be the overall downward, so there will continue to have water from the bottom of the tank into the glass plate, and due to the tension of the water itself, the following water and through the folder layer overflow to the overflow area.

It is very important to prevent the water from the water supply. In order to avoid the water cut, the water pump stops working. The water in the tank will continue to flow into the bottom of the overflow area, but when the water level reaches the same height, the height of the water surface is high. At this time, the water will not flow, so it will not overflow water.

Top overflow is due to pump the water does not stop from the side of the tank filter pump enters the cylinder, master cylinder so water is always higher than that of the water inlet of the upper part of the filter side tank (the upper block fishgarth). The water added into the side of the filter tank, the pump continues to pump water into the main cylinder, so move in circles, a overflow cycle.

On article: no Next article: What is overflo